[HW Accel Support]: Asustor AS6404T FFmpeg crashing #11411
Unanswered
maxi1134
asked this question in
Hardware Acceleration Support
Replies: 11 comments 22 replies
-
|
What resolution are these cameras? It appears the url is not sending a valid stream |
Beta Was this translation helpful? Give feedback.
0 replies
-
They range from 800x600 for substreams to 2k for higher-resolution cameras. The same config works on my proxmox VM with no issue. |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
I did some more testing! This camera seems to work: its FFprobe is: The three others are not working. BUT the ffprobe seems to work Per instance Gives an FFProbe of |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
I got everything to work after many trial and errors. I am still facing an "issue" My logs are spamming this: But the recordings are flawless and the camera stream is clear as day and not choppy. What could they be? |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
this means that some recordings are not being kept. What is your current config |
Beta Was this translation helpful? Give feedback.
-
I tried reducing the camera bitrate and resolution last night. It was at 4k@8mbps This is the working config. |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
I still get massive logs of this Would getting a new more beefy NUC for frigate help? It would also have a dedicated SSD |
Beta Was this translation helpful? Give feedback.
3 replies
-
|
It might. You'll want to enable debug logs for |
Beta Was this translation helpful? Give feedback.
-
The logs now show this: |
Beta Was this translation helpful? Give feedback.
-
|
It's taking multiple seconds to transfer a single recording segment. This indicates I/O is very slow |
Beta Was this translation helpful? Give feedback.
-
|
But why is it recording all the time? |
Beta Was this translation helpful? Give feedback.
2 replies
-
|
presumably because there is an active object detected |
Beta Was this translation helpful? Give feedback.
-
Nothing for an hour or so in the events or the debug |
Beta Was this translation helpful? Give feedback.
-
|
I tried reducing the IO/CPU use on the NAS but the issue persists. Would this be a good host SOLELY for frigate running on ubuntu? If not enough, would this be a good fit? And ultimately, if both of those are too high end, is this enough? |
Beta Was this translation helpful? Give feedback.
2 replies
-
|
The first two both seem like they would work well, I know of many users using an n100 based device |
Beta Was this translation helpful? Give feedback.
-
|
4 Threads will not be too limiting if I am to reach per instance 6 cameras. Most of them are over 2k(One at almost 4k I believe) for live viewing/recording. And I use their substream for detection. |
Beta Was this translation helpful? Give feedback.
-
The issue persist on a fresh install on the new NUC(https://www.amazon.ca/Beelink-U57-Processor-256G-Performance/dp/B0879KKTCB). I used the same Frigate configuration, which leads me to think that is the issue! |
Beta Was this translation helpful? Give feedback.
4 replies
-
|
What is the config now? |
Beta Was this translation helpful? Give feedback.
-
First of all, thank you for the amazing support Secondly, Here it is! |
Beta Was this translation helpful? Give feedback.
-
|
And if it can help: Go2RTC Logs: Frigate logs: |
Beta Was this translation helpful? Give feedback.
-
|
And here a screenshot of my systems stats, nothing seems saturated |
Beta Was this translation helpful? Give feedback.
-
|
Switching to Suppresses the unable to keep up errors, but generates new ones. The live views seem to work, but the debug ( detection stream) does not. |
Beta Was this translation helpful? Give feedback.
10 replies
-
|
okay, that looks good. Can we see screenshots of the system pages in the UI |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
is there a reason why front-door is running at 15 fps? that seems high, detect fps does not need to match camera fps |
Beta Was this translation helpful? Give feedback.
-
I have it at 5 in the config, so I am not sure Edit: I think you meant BAck-door. It's been switched to 5fps! |
Beta Was this translation helpful? Give feedback.
-
|
The error persist after having set the detect FPS to 5. |
Beta Was this translation helpful? Give feedback.
-
|
Any idea? Is replacing the machine a solution? |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Describe the problem you are having
I try running Frigate on my NAS in docker.
Both with
LIBVA_DRIVER_NAME: i965and withoutAnd both with
And without
Version
Latest tag in docker
Frigate config file
docker-compose file or Docker CLI command
Relevant log output
FFprobe output from your camera
I don't have ffmpeg on my OS apparentlyOperating system
Other Linux
Install method
Docker Compose
Network connection
Wired
Camera make and model
Geovision,Reolink,BrillCam,Revotech
Any other information that may be helpful
No response
Beta Was this translation helpful? Give feedback.
All reactions