Tasmota Device Group with 2 Treatlife DS03 #18003
Unanswered
maranhaoBruno
asked this question in
Q&A
Replies: 1 comment
-
Hi, did you manage to figure this out? |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
I have two Treatlife DS03's that I recently purchased and removed the stock chip and replaced them with ESP8266's flashed with Tasmota. The devices were set up as described here (https://templates.blakadder.com/treatlife_DS03.html) and here (https://digiblur.com/2020/07/03/the-treatlife-esmlfe-tasmota-fan-controller/).
One of the devices is connected to the ceiling fan with lights, and the other is just connected to line power with the fan and light loads capped. I would like them to operate as a three way switch such that changes made to either switch are reflected to the other, and as such will effect the fan and light.
I thought I would do this with the device groups feature. However, the only commands that seem to be shared between the switches is the on/off status of the fan and light. The fan speed and the light dimness level are not shared. Any help in troubleshooting and resolving this would be much appreciated.
Beta Was this translation helpful? Give feedback.
All reactions