Skip to content

LedgerHQ/satstack

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Ledger SatStack

satstack logo

Ledger SatStack is a lightweight bridge to connect Ledger Live with your personal Bitcoin full node. It's designed to allow Ledger Live users use Bitcoin without compromising on privacy, or relying on Ledger's infrastructure.

Table of Contents

Background

Running a full node is the only way you can use Bitcoin in a completely trustless way. A full node downloads the entire blockchain, and checks it against Bitcoin's consensus rules, and contributes to the decentralization and economic strength of Bitcoin. However, a far more compelling reason to run your own node is privacy. ...read more.

Running a node can be difficult for some users, and has associated costs in terms of network bandwidth and disk usage. This is why Live connects to Bitcoin nodes running on Ledger's infrastucture, wrapped around by indexer and explorer services to ensure fast queries. While security and privacy is core to Ledger, one can make a theoretical case that Ledger can spy on transaction details, or even censor certain addresses from using Ledger's services.

SatStack aims to render Ledger's infrastructure dispensable, by allowing users to connect Ledger Live with their personal Bitcoin full node.

Architecture

Ledger SatStack is a standalone Go application, that acts as a bridge between the Ledger Live application and a Bitcoin Core full-node. It exposes a REST interface to the open-source JS library embedded by Live, and communicates to the Bitcoin node over RPC. It utilizes the transport layer and data-structures of btcd.

Requirements

  • Bitcoin Nano app 2+
  • Bitcoin Core 0.22.0+
  • Ledger Live (desktop) 2.44.0+ but don't go as far 2.53+ that breaks satstack! https://download.live.ledger.com/ to get the latest supported i.e. 2.52.0
  • txindex=1 in bitcoin.conf is not mandatory, but recommended. Pruned nodes are not currently supported.
  • Wallet should NOT be disabled (attn. Raspiblitz users).

Usage

Setup Ledger Live (recommended way but only works without Tor)

The easiest way of getting started is to use the dedicated setup flow directly on Ledger Live. A detailed guide is available here.

Manual setup (for advanced users)

Retrieve descriptors from device

Simply follow these steps:

  1. Plug in your Ledger device via USB.
  2. Enter your PIN code on the device, and open the Bitcoin app.
  3. Run the scripts/getdescriptor script, as shown below.
$ cd scripts
$ python3 -m venv venv  # ensure Python 3.8+
$ source venv/bin/activate
(venv) $ pip install -r requirements.txt
(venv) $ ./getdescriptor --scheme native_segwit --chain main --account 3
External: wpkh([b91fb6c1/84'/0'/3']xpub6D1gvTP...VeMLtH6/0/*)
Internal: wpkh([b91fb6c1/84'/0'/3']xpub6D1gvTP...VeMLtH6/1/*)

if you get an unsupported hash type ripemd160 error, please see this

Create configuration file

Create a config file lss.json in your home directory. You can use this sample config file as a template.

Add "torproxy": "socks5://127.0.0.1:9050", to connect to a Tor client running locally so that satstack can reach a full node behind Tor. Replace the rpcurl with the .onion address of your node.

Optional account fields
  • depth: override the number of addresses to derive and import in the Bitcoin wallet. Defaults to 1000.

  • birthday: set the earliest known creation date (YYYY/MM/DD format), for faster account import. Defaults to 2013/09/10 (BIP0039 proposal date). Refer to the table below for a list of safe wallet birthdays to choose from.

    Event Date (YYYY/MM/DD)
    BIP0039 proposal created 2013/09/10 (default)
    First ever BIP39 compatible Ledger device (Nano) shipped 2014/11/24
    First ever Ledger Nano S shipped 2016/07/28
Launch Bitcoin full node

Make sure you've read the requirements first, and that your node is configured properly. Here's the recommended configuration for bitcoin.conf:

It is not recommended to use rpcuser/rpcpassword in the bitcoin.conf of your full node use rpcauth instead. If you still want to use it make sure the following settings are in your bitcoin.conf file:

# Enable RPC server
server=1

# Enable indexes
txindex=1
blockfilterindex=1

# Set RPC credentials
rpcuser=<user>
rpcpassword=<password>

If you want to use the newest security standard recommended by the core-devs then read the following paragraph. Get the rpcauth.py script from the bitcoin repo and create a new user for satstack.

wget https://raw.githubusercontent.com/bitcoin/bitcoin/master/share/rpcauth/rpcauth.py

python3 rpcauth.py satstack

Example Output:
rpcauth=satstack:a14191e6892facf70686a397b126423$ddd6f7480817bd6f8083a2e07e24b93c4d74e667f3a001df26c5dd0ef5eafd0d
Your password:
VX3z87LBVc_X7NBLABLABLABLA

Copy the rpcauth= into your bitcoin.conf Note down the password and use them in your lss.json. There you will use the credentials

In your lss.json:

"rpcuser": "satstack",
"rpcpassword": "VX3z87LBVc_X7NBLABLABLABLA"
# Enable RPC server
server=1

# Enable indexes
txindex=1
blockfilterindex=1

# Set RPC credentials
# Example Auth, replace with your own.
# see https://bitcoin.stackexchange.com/questions/46782/rpc-cookie-authentication why we are not using normal rpcuser/password
rpcauth=satstack:a14191e6892facf70686a397b126423$ddd6f7480817bd6f8083a2e07e24b93c4d74e667f3a001df26c5dd0ef5eafd0d

Then launch bitcoind like this:

bitcoind
Launch SatStack

Pre-built binaries are available for download on the releases page (Linux, Windows, MacOS). Extract the tarball, and launch it as:

./lss

There are some cmd handles which can be useful when configuring the setup the first time. List them with

./lss -h or ./lss --help

When setting up a new wallet, the wallet is synced form the birthday date or your custom date set in lss.json When the initial sync sucessfully completes, satstack saves a file called lss_rescan.json at the exact location where the lss.json is stored. This file includes the latest blockheight your wallet was synced to, this allows satstack on every restart to not rescan the whole wallet again but only rescan the difference between the current blockheight. You can also change the latest blockheight manually in the file which helps you to set the rescan delta manually. This file is only created when an initial wallet sync was successful. Removing the file will lead satstack to rescan the complete wallet again when starting up.

If you want to build lss yourself, just do the following:

(make sure you have mage installed first)

mage release  # or "mage build" for a development build

On startup, SatStack will wait for the Bitcoin node to be fully synced, and import your accounts. This can take a while.

Launch Ledger Live Desktop
# environment variables `EXPLORER` and `EXPLORER_SATSTACK` should point at the address
# where `lss` is listening (can be a differnet computer/server)
$ EXPLORER=http://127.0.0.1:20000 <Ledger Live executable>
Turn SatStack into a service

Once descriptors are imported, you might want to automatically start SatStack on your computer as a background task. On Linux, you can do so thanks to systemd, you will have to use the WorkingDirectory settings so that SatStack finds the config file. You will also have to have a tor deamon running in the background.

Misc

If you get error=failed to load wallet: -4: Wallet file verification failed. SQLiteDatabase: Unable to obtain an exclusive lock on the database, is it being used by another bitcoind? maybe this is because you have bitcoind windows opened, if this is the case, please try closing them and restart lss.

In the press

Title Source
🇬🇧 Personal sovereignty with Ledger SatStack blog.ledger.com
🇫🇷 Ledger SatStack: un pont entre Bitcoin Core et votre Ledger Wallet bitcoin.fr
🇫🇷 Votre propre coffre-fort à bitcoins… inviolable – Ledger annonce l’arrivée des full nodes Bitcoin Journal du Coin
🇫🇷 Il est désormais possible d’exécuter un full node Bitcoin sur Ledger Live beincrypto.com
🇪🇸 Ledger Live será compatible con nodos propios de Bitcoin CriptoNoticias
🇬🇧 Bitcoin Tech Talk #218: Curing Monetary Stockholm Syndrome (mention) Jimmy Song

Community

For feedback or support, please tag @Ledger on Twitter. To report any bugs related to full node on Ledger Live, you can create issues on this repository. For support, please reach out to Ledger Support.

Contributing

Contributions in the form of code improvements, documentation, tutorials, and feedback are most welcome.

For contributions to the code, we recommend these guidelines.

Call for Cowsay contributions

On startup, satstack will display a message about Bitcoin, randomly picked from a curated collection of interesting quotes, facts, email excerpts, etc. You are welcome to contribute by creating a pull request modifying this file (includes guidelines for editing the file). Here's an example of how it is rendered:

Cowsay ideas

Please mention the source when you make a contribution, so we can attribute the original author(s) and include a copy of the license if required.