Skip to content

🎞️ A library for handing animations combining page position and time

Notifications You must be signed in to change notification settings

callumacrae/transform-when

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

56 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

transform-when Build Status

A library for handing animations combining page position and time, written at SamKnows.

For a full demo at 60fps, see: samknows.com (archive.org), or for a simpler demo, check out this article I wrote.

Installation

$ npm install --save transform-when

Features

  • Blurs the line the between reactive and time-based animations, allowing you to combine variables such as page position, time, and user actions.
  • Uses a number of techniques to ensure extremely high performance: both on desktop and on mobile.
    • Uses pure functions to intelligently know when a property is going to change without having to call the transform function first.
    • Calculates every value to set, and then sets them all in one go, effectively making layout thrashing impossible.
    • Stores property values and compares changes against the old values to ensure that it actually is a change before setting it: sort of like a virtual DOM, but without a virtual DOM.
    • Uses requestAnimationFrame to ensure that it is only ran when necessary.
  • It is powerful. You can make complicated animations with this library.
  • Because it is low-level and doesn't contain any knowledge of the stuff it is animating (that bit is left up to you), it's extremely lightweight: minified and gzipped, the whole library is under 10KB
  • Works with both HTML elements and SVG elements.
  • Tested in IE11+.

Usage

const Transformer = require('transform-when');

new Transformer([
  {
    el: document.querySelector('.my-element'),
    styles: [
      ['opacity', function (y) {
        if (y > 600) {
          return 0;
        }
        
        return 1;
      }]
    ]
  }
]);

The above code sets up a fairly simple transformer: it sets the opacity of the element to 0 if window.scrollY reaches more than 600, and back to 1 if the user scrolls back up above 600px again.

In addition to styles, transform-when can animate attrs, and transforms. transforms is a helper function, and will set the transform style on HTML elements and the transform property on SVG elements.

Let's take a look at a longer example that uses all three:

const Transformer = require('transform-when');

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    styles: [
      ['opacity', function (y) {
        // This function animates the opacity from 1 to 0 between 500px and 600px:
        // we'll explore it some more later.
        return Transformer.transform([500, 600], [1, 0], y);
      }]
    ],
    attrs: [
      ['class', function (y) {
        return 'my-element' + (y > 500 && y < 600 ? ' animating' : '');
      }]
    ],
    transforms: [
      ['scale', function (y) {
        return Transformer.transform([500, 600], [1, 0.5], y);
      }]
    ]
  }
]);

That code would take the element (or elements) matching .my-element, and then when the user scrolls between 500px and 600px, it would animate the opacity from 1 to 0, animate the scale from 1 to 0.5, and apply the animating class.

Terminology

  • The Transformer function takes either a transform object or an array of them.
  • Each transform object should have an el property containing an element (or NodeList) and some properties to animate: styles, attrs, and transforms.
  • Properties use transform functions to calculate what values should be changed. Transform functions should be pure functions (without side effects), and request only the arguments requested so they can be heavily optimised.

That's it.

Transform function arguments (smart arguments)

The transform functions above only have one argument, y, but if you were to change that to x or i, you would get a different number. This is because transform-when uses the arguments to detect when a property needs to be changed before actually calling the transform function: if the only argument is y and the y position of the page hasn't changed since the function was last called, then it doesn't bother to call the transform function.

This is what makes transform-when so performant - but it means that transform functions should be pure as much as possible (if you want something to be random, don't worry - read the section on i below).

There are (currently) four different arguments you can request: y, x, i and actions.

Scroll position (x and y)

The x and y values are simply window.scrollX and window.scrollY (or the IE equivalents)—how far down or along the page the user has scrolled.

Time (i)

i starts at 0, and increases by 1 for each frame—effectively, it's the frame number. This is useful for animating by time.

If you want the actual time or a duration, you can calculate that yourself using Date.now().

If you want an impure transform function—say, you want to change it a bit randomly—request the i argument and the transform function will be called every time.

User actions (actions)

Sometimes you want a break in the normal animation: say, if a user clicks on something, or if a certain position on the page is reached. transform-when has a concept of actions: these can be triggered, and then play for a given amount of time.

You trigger them using the .trigger() method, and they're passed in using an actions argument:

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    transforms: [
      ['rotate', function (actions) {
        // actions === { spin: x } where x is a number between 0 and 1
        
        if (actions.spin) {
          return 360 * actions.spin;
        }
        
        return 0;
      }, 'deg']
    ]
  }
]);

transforms.trigger('spin', 2000);

Multiple actions can be triggered at the same time.

The .trigger() function returns a promise which resolves when the action completes. It uses native promises, and will return undefined when window.Promise is undefined.

Custom variables

It's possible to add your own variables.

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    styles: [
      ['opacity', function (myCustomVariable) {
      
      }]
    ]
  }
]);

transforms.addVariable('myCustomVariable', function () {
  // Return what you want `myCustomVariable` to equal
});

The transform function is still only called when the variable is changed - except for the way it is generated, custom variables are treated exactly the same as scroll position, time and user actions.

Minifiers

Minifiers will, by default, break transform-when if they rename variables. The way around this is to wrap the function in an array saying what variables you need:

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    transforms: [
      ['rotate', ['actions', function (actions) {
        if (actions.spin) {
          return 360 * actions.spin;
        }
        
        return 0;
      }], 'deg']
    ]
  }
]);

The minifier won't touch the string, and transform-when will look at that instead.

this

In a transform function, this refers to the transform object. This allows you to store stuff like scales on the transform object:

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    colorScale: chroma.scale(['red', 'blue']).domain([500, 600]),
    styles: [
      ['color', function (y) {
        return this.colorScale(y);
      }]
    ]
  }
]);

Types of properties

There are three types of properties, styles, attrs and transforms. The first two are both pretty simple: they just set styles and attributes of an element. Be careful animating attributes and styles that aren't the opacity: they are more expensive to animate than transforms and opacity, and might make your animation jerky.

Each takes an array of three things: the property (style or attribute) to animate, the transform functions, and optionally the unit to use - it's better to let transform-when handle adding the unit, because it will also round the number for you.

Let's take a look at an example:

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    styles: [
      ['padding', function (y) {
        return Transformer.transform([500, 600], [20, 50], y);
      }, 'px']
    ],
    attrs: [
      ['class', function (y) {
        return 'my-element' + (y > 500 && y < 600 ? ' animating' : '');
      }]
    ],
  }
]);

That animates the padding of an element from 20px to 50px, and adds the animating class.

Transforms are a little trickier.

Animating transforms

CSS or SVG transforms are all set on one property. For example, a CSS transform could be scaleY(0.5) translate(10px 20px) and an SVG transform could be scale(1 0.5) translate(10 20). Transforms are the reason for the slightly strange syntax using arrays for properties, not objects: order is important. Translating an element then scaling it is pretty different to scaling it and then translating it.

transform-when looks at the array, turning each property into part of the transform attribute (for SVG) or style (for HTML elements).

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    transforms: [
      ['scale', function (y) {
        return Transformer.transform([500, 600], [1, 1.5], y);
      }],
      ['translateX', function (y) {
        return Transformer.transform([500, 600], [0, 50], y);
      }, 'px']
    ]
  }
]);

That would return scale(1) translateX(0px) when the y position of the page is 500px, scale(1.5) translateX(50px) when the y position of the page is 600px, and transition between the two.

Because the library doesn't have any knowledge of the properties it is animating, remember to specify units when required for CSS transforms, and don't try to use scaleY on an SVG!

Animating multiple properties at once

Sometimes it's necessary to animate multiple properties at the same time with the same value—for example, for CSS vendor prefixes. It isn't necessary to specify two different properties with the same transform functions (and it would be pretty inefficient, too): you can just specify the property as an array:

const transformer = new Transformer([
  {
    el: mock,
    styles: [
      [['clip-path', 'webkit-clip-path'], function (i) {
        return 'circle(50px at 0% 100px)';
      }]
    ]
  }
]);

Transform helpers

transform-when provides a couple functions to help with animating values between two different points: Transformer.transform(), and Transformer.transformObj(). If you're familiar with d3, Transformer.transform() work pretty similar to d3's scale functions.

Both functions map a domain to a range: for example, if you want to animate the scale of an element from 1 to 2 between the y positions of 500px and 600px, you could do it like this:

const scale = (x) => (2 - 1) * (y - 500) / (600 - 500) + 1;

That gets complicated. Instead, you can use one of the helpers:

Transformer.transform([500, 600], [1, 2], y);

Transformer.transform()

A simple scale function with three arguments, domain, range, and value. Takes the value and converts it into a new number.

Transformer.transform([400, 600], [1, 0], 400); // 1
Transformer.transform([400, 600], [1, 0], 500); // 0.5
Transformer.transform([400, 600], [1, 0], 600); // 0

If only given two arguments, it'll return a function that can be called with the final value, but there is no performance advantage to doing this:

const myTransform = Transformer.transform([400, 600], [1, 0]);

myTransform(400); // 1
myTransform(500); // 0.5
myTransform(600); // 0

Transformer.transformObj()

A slightly more complicated, more powerful version of the previous function. It takes an object with input values and output values to allow scales with multiple stages:

const myTransform = Transformer.transformObj({
  400: 1,
  600: 0,
  1000: 0,
  1200: 1
});

myTransform(0); // 1
myTransform(400); // 1
myTransform(500); // 0.5
myTransform(600); // 0

If the y position of the page were passed in and the result used as an opacity, the above code would make the element start visible, then fade it out between 400px and 600px, then fade it back in again between 1000px and 1200px.

This function also takes two more arguments, loopBy and easing.

loopBy

This argument allows you to specify a point after which the animation should repeat itself. For example, if you want to animate the scale from 0.5 to 1 and back again over time, you could do this:

const scaleTransform = Transformer.transformObj({
  0: 0.5,
  30: 1
}, 60);

scaleTransform(i); // Animates from 0.5 to 1 and back repeatedly as i increases
easing

Transformer.transformObj() has basic support for easings. You can either pass in the name of the easing—you can find the built in ones here—or you can pass in you own easing function.

Unlike standard easing functions, they're given one argument and return one number: both percentages (number between 0 and 1).

For example, a quadratic ease in (easeInQuad) looks like this:

const easeInQuad = (x) => x * x;

Pull requests adding other easings very welcome!

visible & setVisible

Transform objects also accept another property, visible. This should be two numbers where when the y position of the page is outside of these values, the element will not be animated. This helps ensure that if you have a lot of elements on the page, the ones that aren't being displayed aren't wasting resources.

const transforms = new Transformer([
  {
    el: document.querySelector('.my-element'),
    visible: [0, 600],
    styles: [
      ['opacity', function (y) {
        return Transformer.transform([500, 600], [1, 0], y);
      }]
    ]
  }
]);

You can also set the property on everything at once using the setVisible() method:

transforms.setVisible([500, 600]);

Pausing and cancelling an animation

It's possible to stop and start the animation using the stop() and start() methods. Stopping the animation will leave the currently animated properties exactly where they are, and stop i from increasing. Starting it again will resume things from where they were when the animation was stopped.

The following will pause the animation for a second:

transforms.stop();

setTimeout(function () {
  transforms.start();
}, 1000);

There's also a reset() method for when you want to stop an animation and restore the transform and element displays to what they were to start off with (styles and attributes will be left as they were). This is useful if you need to reinitialise the animate when the window is resized:

let transforms;

function init() {
  if (transforms) {
    transforms.reset();
  }
  
  transforms = new Transformer([ ... ]);
}

init();
window.addEventListener('resize', debounce(init));

Changing the element to get the scroll position from

By default, transform-when gets the scroll positions from the window, but this isn't always what you want. To change it, just change the scrollElement property to contain a selector for the element you want to get the scroll position of instead:

transforms.scrollElement = '.my-scroll-element';

Configuring how i increases

The default behaviour of i is to increase by 1 on each frame, up to a maximum of 60 times. On most monitors, this just means that i will be the number of the frame, because most monitors don't go above 60fps. On monitors that are capable of a higher fps such as gaming monitors, however, this means that i won't necessarily be a whole number. If the monitor runs at 120fps, i will increase by about 0.5 120 times a second.

This is configurable! There are three options, belowOptimal and aboveOptimal, each of which can be set to "count" (to increase by 1 each frame) or "time" (to increase so that i increases by 60 per second). By default, belowOptimal is set to "count" and aboveOptimal is set to "time".

You may want to change belowOptimal to "time". You probably don't want to change aboveOptimal to "count".

transforms.iIncrease.belowOptimal = 'time';

You can also configure the optimal FPS. By default it's 60, but you can change it:

transforms.iIncrease.optimalFps = 120;

Happy animating :)

🎉

License

Released under the MIT license.

About

🎞️ A library for handing animations combining page position and time

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published