Installation

Installation

In order to run custom applications on your Mazda Infotainment System you need to install the Custom Application runtime system.

This document will guide you through the process step by step.

Preparation

1. Prepare a USB stick with at least 2GB free memory and format it as FAT32.

2. Download the latest runtime system and extract the ZIP archive to the USB stick.

Installation in the car

1. Make sure your car is turned off.

2. Plug the USB stick in one of the USB ports in your car.

3. Turn on the car - do not start the engine.

4. Wait until the Infotainment system is completely started.

5. Once the installation success dialog is displayed, reboot the system by holding down BACK + NAV + MUTE for about 10 seconds.

6. The installation is now complete.