Skip to content

Driving one of those cheap RF1101SE boards with a Arduino or Teensy

Notifications You must be signed in to change notification settings

gyaresu/rf1101se-teensy

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

94 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

rf1101se-teensy

Hi! This is my repo for learning about microcontrollers and packetised radio with the CC1101 by Texas Instruments chip driven by 'Arduino-compatible' devices.

You're going to want to have at least one (or a dozen) of these really really cheap RF1101SE radio module based on a Texas Instruments CC1101 chip (that's the one with no MCU and no USB, just the radio).

rf1101 with atmega328 from boldport and FTDI serial adapter I'm driving this 3.3v chip directly from the Atmega328 with 5v... but other chips have acted in super weird ways. So now you've been warned(!), it really shouldn't work. YMMV ¯\(ツ)

  • cc1101 — Just the radio
  • cc1110 — radio and MCU (Radica IM-ME used in OpenSesame)
  • cc1111 — radio, mcu, usb (YARD Stick One)

You're also going to want to have a Teensy, Arduino or basically any microcontroller that can speak SPI.

Now all of this works with the Arduino 'whatever' but if you have a 'whatever' then you'll need Logic Converters because "whatever's" do 5V on the digital pins and the Teensy can deal with either 3.3V or 5V because...

Teensy don't care.

Teensy is your basic honey badger of small inexpensive microcontroller boards. It runs a Cortex-M4 which comes with a whole bunch of functionality built right into the chip.

Please note that the cheap rf1101se-v3.1/whatever radio board you got from Aliexpress is probably only good for 433MHz because they all seem to be missing resistors on the circuit board that would enable it to be useful at any other frequencies. So it's not the chip that's at fault, just the cheap board design.

Encode all the things!

The example presented currently enables:

Read The Fine Manual

I've tried to document what the registers do in the Arduino code. You really need to read the manual though to understand what's going on.

cc1101 reference manual

gfsk manchester gfsk manchester detailed gfsk manchester decoding

TODO Move to the default Arduino SPI library. I would like to drive two slave devices (cc1101 chips) with a single microcontroller but the included panstamp library has it's own spi.c and spi.h which don't allow SPI.setSCK(pin)

ASK/OOK encoding

I include Yardstick One (YS1) code in this repo because I have one. If you don't have one then get one because they're awesome.

Links to things