Skip to content

Prometheus (+MQTT) exporter for Tinkerforge's brickd

License

Notifications You must be signed in to change notification settings

vetinari/brickd_exporter

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

82 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Prometheus Brickd Exporter

The brickd exporter is a Prometheus exporter which connects to a Tinkerforge brickd and exports the values from the connected bricks and bricklets. It can additionally send the data to an MQTT broker, see MQTT section on how to configure the broker and topics.

Data from the brickd is collected in the background. Currently callbackPeriod is set to 10,000 ms, which can be changed in the config.

Note: the sub_id label has been deprecated, it is replaced by the sensor_id label in the metrics and will be removed in the future.

Usage

Pre-requisite

go version 1.21 or later.

Building the brickd exporter

Clone the repository via go get github.com/vetinari/brickd_exporter or git and cd into the directory. Then build the brickd_exporter binary with the following commands.

$ make build

or to build for a raspberry pi:

$ make build.raspi

The resulting binary will be in the ./build/ directory

Configuration

When no --config.file /path/to/brickd.yml is given, the default config is:

collector:
    log_level: info
    callback_period: 10s
    ignored_uids: []
    led_status: "on"
    expire_period: 0s
listen:
    address: :9639
    metrics_path: /metrics
brickd:
    address: localhost:4223
mqtt:
    enabled: false
    topic: "brickd/"
    homeassistant:
       enabled: false
       discovery_base: homeassistant/
       interval: 5m

Any of these values can be set. Use the default brickd.address when the bricks are connected on local USB port.

collector.log_level can be set to debug to see the devices discovered and their values received from the callbacks.

collector.labels is a key -> value map of strings which will be applied to all metrics.

collector.sensor_labels is a mapping of the UID of the brick(let), to sensor id (as string, usually "0" for all except with the "Outdoor Weather Bricklet" to a key -> value map of strings, see brickd.yml for examples. Those will only applied to the defined sensors.

collector.expire_period sets a duration after which old values are not exported anymore, i.e. if the latest value of a brick / bricklet has been received from brickd more than this period ago it will not be shown anymore. 0s (or any other time.Duration of 0 disables this feature (the default). Do not set this too low or you might not export anything :) Depending on your use case 2 or more times the collector.callback_period should be OK.

Setting collector.led_status attempts to set the LED of the bricklets where available, default is "on", other possible values are "off", "heartbeat"and"status"`.

MQTT

The MQTT broker is configured in the mqtt section. An example config looks like:

mqtt:
  enabled: true
  broker:
    host: 192.168.5.33
    port: 1883
    username: brickd
    password: brickd_pass
    client_id: brickd_exporter
  topic: brickd/

Note: if you're running multiple brickd exporter each one must get a unique client_id.

The mqtt.topic sets the base topic where each metric is reported to. The target topic (key mqtt_topic) for the metrics are per device uid + sensor id configured in the collector.sensor_labels. Check the supplied example config how this is done. Note: the mqtt_topic will not be in the labels (not in prometheus and not in the MQTT payload).

The "Master Brick", "HAT Brick" and "HAT Zero Brick" values are reported in the topics master_brick, hat_brick and hat_zero_brick topics respectively (prefixed by mqtt.topic of course).

Home Assistant

With MQTT enabled, you can also enable the auto discovery options for Home Assistant. This is done by extending the mqtt settings like

mqtt:
  enabled: true
  broker:
    host: 192.168.5.33
    port: 1883
    username: brickd
    password: brickd_pass
    client_id: brickd_exporter
  topic: brickd/
  homeassistant:
    enabled: true
    discovery_base: homeassistant/
    interval: 5m

After starting, the new devices - one per bricklet - and their entities should show up in your HA setup.

Running

Start with --config.file /path/to/brickd.yml to pass a config file.

Suported bricks and bricklets

Bricks:

Bricklets:

Adding more is easy, see Contributing

Contributing

If you would like to contribute code or documentation, follow these steps:

  • Clone a local copy.
  • Make your changes on a uniquely named branch.
  • Comment those changes.
  • Test those changes
  • Make sure the code is go formatted (hint: gofmt -w $file)
  • Push your branch to a fork and create a Pull Request.

Adding new bricks and bricklets

  • add register function, check the existing ones in collector/bricks.go / collector/bricklets.go as examples.
  • add the functions to the NewCollector, example of existing ones:
      brickd.Devices = map[uint16]RegisterFunc{
        master_brick.DeviceIdentifier:      brickd.RegisterMasterBrick,
        humidity_bricklet.DeviceIdentifier: brickd.RegisterHumidityBricklet,
      }
  • don't forget to update the imports
  • test new devices and create a pull request (see above).

About

Prometheus (+MQTT) exporter for Tinkerforge's brickd

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages