Skip to content

Instruction how to install Arch Linux on encrypted(optionally) btrfs partition with encrypted /boot

Notifications You must be signed in to change notification settings

Szwendacz99/Arch-install-encrypted-btrfs

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

35 Commits
 
 

Repository files navigation

ArchLinux install encrypted btrfs

Install Arch Linux on EFI system with full filesystem (including /boot) encrypted and on btrfs partition

Official guide for basic install: https://wiki.archlinux.org/index.php/Installation_Guide
it is always good to consult with official guide, cause arch config might change in time
For setting up different locale, or better explanations check out Arch Wiki

1. Boot ISO

Download the ISO file from https://www.archlinux.org

Put on pendrive

dd if=archlinux.img of=/dev/sdX bs=16M && sync

Boot from the USB.

Optional (experimental approach to have desktop environment during install):

Extend writable space so you can install basic desktop in live environment and for example use gparted for partitioning or open this tutorial in web browser or whatever you want.

Remember this area is saved in your RAM, so make sure you have enough of it

mount -o remount,size=5G /run/archiso/cowspace

pacman -Syy plasma-desktop glibc konsole xorg
pacman -Scc

startplasma-wayland

Set key map

loadkeys pl  

Update clock

timedatectl set-ntp true  

Optionally (recommended) update mirrorlist

reflector --country 'Poland' --age 24 --verbose --sort rate --save /etc/pacman.d/mirrorlist  

2. Prepare Disk

Update btrfs-progs

pacman -Syy btrfs-progs

Display disks and partitions

lsblk

Create partitions (if you have not already)

fdisk /dev/sdX  
  1. 100MB EFI partition
  2. 100% size partiton # ( encrypted optionally) for BTRFS partition, this partition will require formatting AFTER encryption if you do encryption
Swap will bin in file with CoW disabled, which will be prepared later

Format EFI partition

mkfs.vfat -F32 /dev/sdX1
----------------- encryption (optional) ------------------

Setup the encryption of the system,

Don't use regional letters (not in en-us keyboard) like ąęć etc. for password. This requires additional steps, which are not covered by this tutorial.

Grub have some kind of support for luks2, but not entirely, so for more fail-safe setup use luks1

cryptsetup -c=aes-xts-plain64 --key-size=512 --hash=sha512 --iter-time=3000 --pbkdf=pbkdf2 --use-random luksFormat --type=luks1 /dev/sdX2  

cryptsetup luksOpen /dev/sdX2 MainPart 

Formatting as btrfs now when it is already encrypted

mkfs.btrfs -L "Arch Linux" /dev/mapper/MainPart  
---------------- end of encryption ------------------------

Format the partition if not yet formatted:

pacman -Syy btrfs-progs  

mkfs.btrfs -L "Arch Linux" /dev/sdX2  

Mount partition to be able to create btrfs subvolumes

If using encryption, change /dev/sdX2 to /dev/mapper/MainPart:
mount /dev/sdX2 /mnt  

Create subvolumes

This scheme can be adjusted to your needs, I'd suggest at least one subvolume for root (@) and one for snapshots (@snapshots). varlog and tmp are created to easily disable Copy on Write on /var/log and /tmp.
btrfs su cr /mnt/@  

btrfs su cr /mnt/@home  

btrfs su cr /mnt/@varlog

btrfs su cr /mnt/@tmp  

btrfs su cr /mnt/@snapshots  
Disable copy on write on /var/log and /tmp
chattr +C /mnt/@varlog
chattr +C /mnt/@tmp  
umount /mnt  

If using encryption, change /dev/sdX2 to /dev/mapper/MainPart:

mount -o defaults,noatime,discard,ssd,subvol=@ /dev/sdX2 /mnt  

mkdir /mnt/home  

mkdir -p /mnt/var/log  

mkdir /mnt/tmp  

mkdir /mnt/snapshots  

mkdir /mnt/efi # for EFI partition /dev/sdX1  

Discard and ssd options and are for ssd disks only

If using encryption, change /dev/sdX2 to /dev/mapper/MainPart

mount -o defaults,noatime,discard,ssd,subvol=@home /dev/sdX2 /mnt/home

mount -o defaults,noatime,discard,ssd,subvol=@varlog /dev/sdX2 /mnt/var/log

mount -o defaults,noatime,discard,ssd,subvol=@tmp /dev/sdX2 /mnt/tmp

mount -o defaults,noatime,discard,ssd,subvol=@snapshots /dev/sdX2 /mnt/snapshots

mount /dev/sdX1 /mnt/efi

3. Install Arch Linux

Select the mirror to be used if not updated with reflector on start

vim /etc/pacman.d/mirrorlist  

Install base system:

This command can be customized with additional packages (btrfs-progs is necessary to let the system boot up from btrfs partition !)
pacstrap /mnt/ base base-devel git btrfs-progs efibootmgr linux linux-headers linux-firmware mkinitcpio dhcpcd bash-completion sudo

Generate fstab:

Use genfstab with -U parameter if no encryption
genfstab /mnt >> /mnt/etc/fstab

4. Configure the system

Switch to installed system root user

arch-chroot /mnt /bin/bash

Setup system clock

ln -s /usr/share/zoneinfo/Europe/Warsaw /etc/localtime  

hwclock --systohc --utc  

Set the hostname in /etc/hostname

myhostname

Edit vconsole in /etc/vconsole.conf

KEYMAP=pl  
FONT=Lat2-Terminus16.psfu.gz  
FONT_MAP=8859-2  

Setup locale

Uncomment pl_PL.UTF-8 in /etc/locale.gen and then run:
locale-gen

Update locale in etc/locale.conf

LANG=en_US.UTF-8
LC_COLLATE=pl_PL.UTF-8
LC_MEASUREMENT=pl_PL.UTF-8
LC_MONETARY=pl_PL.UTF-8
LC_NUMERIC=pl_PL.UTF-8
LC_TIME=pl_PL.UTF-8

Hosts in /etc/hosts

127.0.0.1 localhost  
::1 localhost  
127.0.1.1 myhostname.localdomain myhostname  

Now create empty (with 0 size) swap file:

Create separate subvolume for swapfile. This subvolume is needed to let you make snapshot of /, which would not be possible with any file in it with CoW disabled!

btrfs su create /swap

chattr +C /swap

Copy on Write should always be disabled on swap file, so it will be done in the next step

touch /swap/swapfile  

Check if C attribute is enabled (should be already if created in folder with disabled CoW attribute)

lsattr /swap/swapfile'

If not then disable CoW for swapfile manually:

chattr +C /swap/swapfile  

Expanding empty file to 4GiB swap file

dd if=/dev/zero of=/swap/swapfile bs=1024K count=4096  

chmod 600 /swap/swapfile  

Format the swap file.

mkswap /swap/swapfile  

Turn swap file on.

swapon /swap/swapfile  

You also need to update /etc/fstab to mount swapfile on boot:

/swap/swapfile none swap sw 0 0  

Set password for root

passwd  

Add real user an set password for him

useradd -m MYUSERNAME 

passwd MYUSERNAME  

Configure mkinitcpio with modules needed for the initrd image

vim /etc/mkinitcpio.conf  

Add 'keyboard', 'keymap', 'encrypt' and 'btrfs' to HOOKS before filesystems:

HOOKS=(base udev autodetect keyboard keymap modconf block btrfs filesystems keyboard fsck)

Add btrfsck to binaries:

BINARIES=(btrfsck)

With encryption: also add encrypt before btrfs:

HOOKS=(... keyboard keymap block encrypt btrfs ... filesystems ...)  

Regenerate initrd images

mkinitcpio -P  

5. Install bootloader

Setup grub (UEFI)

pacman -S grub efibootmgr os-prober dosfstools mtools  

-------------encryption only---------------------

edit /etc/default/grub

GRUB_ENABLE_CRYPTODISK=y 

Find UUID (UUID for /dev/sdX2) of crypto partition so we can add it to grub config

blkid 

Now set this line including proper UUID in place of "<device-UUID>":

(temporarly you can use /dev/sdX2 in place of "UUID=<device-UUID>" and change it later easy in gui mode)

edit /etc/default/grub
GRUB_CMDLINE_LINUX="cryptdevice=UUID=<device-UUID>:MainPart:allow-discards"  
allow-discards is only for ssd to let trim work with encryption enabled

Generate key so grub don't ask twice for password on boot

dd bs=512 count=4 if=/dev/random of=/crypto_keyfile.bin iflag=fullblock  
chmod 600 /crypto_keyfile.bin  
chmod 600 /boot/initramfs-linux*  
cryptsetup luksAddKey /dev/sdX2 /crypto_keyfile.bin  

If you change name of key file there is need to add kernel parameter like cryptkey=rootfs:path

Crypto_keyfile.bin is the default name that kernel will guess anyway

Now add this file to /etc/mkinitcpio.conf

FILES=(/crypto_keyfile.bin) 

then run:

mkinitcpio -P  

-------------encryption end---------------------

Install grub for

grub-install --target=x86_64-efi --efi-directory=/efi --bootloader-id=GRUB  
grub-mkconfig -o /boot/grub/grub.cfg  

Exit new system

exit  

Unmount all partitions

swapoff -a  
umount -R /mnt

Reboot into the new system, don't forget to remove the pendrive

reboot  

or

shutdown now  

6. Addtitional tips:

Install AUR helper (git and base-devel packages needed to do so):

git clone https://aur.archlinux.org/yay.git

cd yay

makepkg -si

To get proper locale and keymap, check:

localectl status

On KDE plasma , also set settings > ... > keyboard layout && regional settings

About

Instruction how to install Arch Linux on encrypted(optionally) btrfs partition with encrypted /boot

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published