PopupChat is an open anonymous instant chat room.
PopupChat is an Arduino sketch that turns your ESP8266 into an open wifi access point that connects users to an anonymous chat room. The user is (usually) sent directly into a popup web browser with the software open as soon as they connect to the wireless AP, because it acts like a Captive Portal (think "hotel wifi").
PopupChat features impermanence. All data is temporary, and PopupChat maintains no logs. The entire system is reset to its default state when power is cycled.
I wanted to explore the ESP8266 and I'm fascinated by the opportunities that highly connected low cost devices like the ESP8266 (and hopefully ESP32) engender.
Data points:
- It's conjectured that the ESP8266 can run for up to 17 days on merely a watch battery
- The chip costs $2 in bulk, or $10 for a deee-luxe development board
- Not much of an operating system to cause confusing behavior
- Single-purposes devices theoretically enable a smaller attack surface for security attacks (in practice vendor bugs probably mitigate the benefit here.. note ESP8266 buggy TLS)
I miss the hyper local and easy to operate bulletin board systems of my youth. My favorite part was checking the Wall to see who's logged on and left a message. Similar to the old fingerd protocol, it was way easier to communicate
All kinds of adhoc communication and group chat systems could be assisted by software like this running on low-cost boards like the ESP8266.
- Disaster relief/mountain rescue organization, triage, etc.
- On-premises customer chat
- Community bulletin board
- Public soapbox
- Pretty bare bones. Just a proof of concept.
- I don't think I nailed the Android Captive Portal experience. Doesn't seem to pop up the browser. Some more useful info here: http://serverfault.com/questions/679393/captive-portal-popups-the-definitive-guide
- Needs great JS UI with autoupdate in order to feel like a finished product.
- Would be best rewritten under NodeMCU.
- Permanency is a valid goal for some situations. PopupChat would benefit from
a version that can store things permanently. The ideal interface would be the
NodeMCU
fileAPI. - Needs a fine-grained control panel/sysop menu with a way to delete troll droppings.
- System should maintain some kind of history of its up times and down times so that the sysop can understand issues relating to installation/power/hardware etc. I've experienced a few surprise restarts.
- Needs dates, especially system reset dates.
I used Arduino to make this, but I'd like to rebuild it with NodeMCU.
Edit the configuration at the top of the .ino file and upload it to your 8266. That's about all it should take.
It would be cool to leave some nodes running this publicly, in a well known and identified public place. This is just an idea so far. I'm waiting to receive more ESP8266s before I can test out the idea more thoroughly.
You must design not just the experience of using your product (art piece or whatever it ends up being), but also the way it interacts with the environment around it. Please think carefully before starting.
You don't need any outbound internet connectivity, so that's a nice time saver.
I used the Elecrow ESP8266 IoT board. The difficult-to-source Wemos D1 Mini may be a better board to use because of its smaller footprint and easier stacking with other boards/shields. I haven't had a chance to use it yet.
Some ESP8266 boards allow you to connect an external wifi antenna, but not most of them. Consider if you need this feature or not. I would suggest the range is OK out of the box with the internal antenna. ESP-12F, a recent variant, is said to have a better antenna.
I've had some good luck so far with this 20,000mAh USB solar battery charger. I need to put it through its paces more intelligently. ZeroLemon SolarJuice 20k mAh solar battery charger
You'll want to find a way to shape it and install it in the installation space. Do you need to worry about vandalism and abuse?
For the enclosure itself, I've had good luck with InstaMorph so far in terms of shaping a tough box to mount things in. It dries pretty strong and you can reheat and reshape bits as neededed. Plus it's cheap and nontoxic.
To attach to its mounting point (where you decide it to be), I might consider CastTape, a carbon fiber product that works similar to Duct Tape - but far more messy, and of course stronger by weight than steel. Be warned that CF can inhibit RF signals (wifi range!) and trap heat, so use with care, and avoid enclosing the antenna area.
For outdoor use you should consider products that inhibit moisture. Luckily this is a well known problem in electronics. My first thought would be some combination of:
- "Liquid electrical tape" compounds like Gardner's.
- a few coats of PlastiDip. It's available in many colors, and a clear variant, but I suggest you make your product's presence known in the conscious environment of the public space where it lives because that's the right thing to do. PlastiDip also lends a nice, comfortable materiality to surfaces on which it's applied.
- Final top coat of NeverWet, which I confess to not having worked with.
I've had some random reboots using solar battery chargers. Even when it's just slightly cloudy. More research required.
It would be best to have NodeMCU running on these public nodes so that you can remotely connect and debug them. It will be almost impossible to re-connect a serial terminal to these when problems develop.
Do not intrude on the privacy of others.
Much of the concepts behind this were hashed out with B. Lee (TX), whose blue skies screed infected me in a heady manner. Thanks to Gil C. (FL) for help understanding Arduino.
MIT license. Based on Captive Portal by M. Ray Burnette 20150831.
Built at Building.co in Miami, FL.
@tlack on Twitter